How Do I Shutdown And Restart My Spa?

All 110V Models

  1. Turn Thermostat Down
  2. Unplug spa or trip GFCI to Off
  3. Drain spa following owners manual
  4. Refill spa by placing the fill hose in the GRAY (HOLLOW) Filter standpipe IF your spa has one. Otherwise always place fill hose in filter compartment.
  5. Once the spa is full, RESTART SPA by turning the power on. Make sure small pump is running.
  6. Turn spa temperature up to desired degree.
220V Permanent 20 AMP Heater Spas

  • 220V Sumatran
  • 220V Bengal
  • 220V Jetsetter
  • 220V Prodigy
  • 220V Soveriegn
  • 220V Vanguard
  • 220V Grandee Mode G
  • 220V Landmark
  • 220V Classic
  • 220V Hilife
  • 220V 2003 Caspian
  • 220V 1992-2002 Siberian
  • 220V Accolade
  • Siberian 2003 – Present, Vista, Envoy, Caspian
    2004 – Present
  1. Turn OFF 20 AMP Breaker in Sub-Box
  2. Turn OFF 30 AMP Breaker in Sub-Box
  3. Drain Spa Following Owners Manual Instructions
  4. Refill Spa By Placing the Hose in the Gray (HOLLOW) Filter Standpipe
  5. Once the Spa is Full, To Restart turn ON 30 AMP Breaker in Sub-Box. Make sure the Circulation pump is running and moving water. You should have OZONE Bubbles.
  6. Once you have STEADY FLOW, Turn ON the 20 AMP Breaker in the Sub-Box

220V Convertible-Permanent 30 AMP Heaters 2003- Present

  • 220 ACFA AC
  • 220V Vista
  • 220V Envoy
  • 220V 2004-Present Caspian
  • 220V 2003-2004 Siberian
  • 220V Model GG – Grandee
  1. Turn OFF 30 AMP Breaker in Sub-Box
  2. Turn OFF 20 AMP Breaker in Sub-Box
  3. Drain Spa Following Owners Manual Instructions
  4. Refill Spa By Placing the Hose in the Gray (HOLLOW) Filter Standpipe
  5. Once the Spa is Full, To Restart turn ON 20 AMP Breaker in Sub-Box. Make sure the Circulation pump is running and moving water. You should have OZONE Bubbles.
  6. Once you have STEADY FLOW, Turn ON the 30 AMP Breaker in the Sub-Box

 

Leave a Comment

You must be logged in to post a comment.